Auto Bracketing - Sigma Digital Compact Camera DP1 User Manual

AUTO BRACKETING

This function of the camera lets you take a sequence of pictures of the
same subject at three different exposure levels; Appropriate Exposure,
Under Exposure and Over Exposure. If it is difficult to determine the proper
exposure, please use this function.
1
Press the
2
Use the buttons to select [Auto Bracket] and press the
3
Use the buttons to set the bracketing amount. (It can be set in 1/3 stop
increments up to ±3)
4
Press the button or the
button to close the sub-menu without making any changes.
■ The camera will take three pictures in the following sequence; Appropriate
exposure, under exposure and over exposure.
■ The exposure bracketing can be used with 4 different modes.
P Mode ; Both shutter speed and aperture value will be changed.
A Mode ; Only shutter speed will be changed.
S Mode ; Only aperture value will be changed.
M Mode ; Only shutter speed will be changed.
61
button to open [ Shooting Menu].
button to apply the settings or the
button.