Viewing Images On A Tv - Sigma SD15 User Manual

VIEWING IMAGES ON A TV

The SD15 camera can be connected to a television or a videocassette
recorder using the provided video cable, allowing the recorded images to be
viewed on the television monitor or recorded on videotape.
WARNING !!
•
Please do not use any video cable other than provided with your Sigma SD15
camera, when connecting a video input terminal. Using other brands may
cause damage.
TIP
•
It is recommended that the camera be powered with the provided AC adapter
during television playback to avoid draining the battery.
•
The default mode for the video signal is NTSC. When connecting the camera
to a PAL device, the Video Mode setting in the Camera Set-up Menu must be
changed. (See P.115)
93
TO CONNECT THE CAMERA
TO A VIDEO DEVICE
1
Open the cover protecting the camera's
VIDEO OUT, DC-IN, and USB connectors.
2
Connect the video cable to the ＜VIDEO OUT＞
terminal on the camera and to the video input
terminal on the television or video cassette
recorder.
3
Turn on the camera and the video device.