KAESER ASK T series Service Manual page 13

Material
Precondition
Option H1
Further information
9_5717 20 E
1 Regarding this document
1.4 Symbols and labels
Here you will find details on special tools, operating materials or spare parts.
Here you will find conditional requirements necessary to carry out the task.
The conditions relevant to safety shown here will help you to avoid dangerous situations.
➤ This symbol denotes lists of actions comprising one stage of a task.
Operating instructions with several steps are numbered in the sequence of the operating steps.
Information relating to one option only are marked with an option code (e.g., H1 indicates that
this section applies only to machines with screw-in machine feet). Option codes used in this
service manual are explained in chapter 2.2.
Information referring to potential problems are identified by a question mark.
The cause is named in the help text ...
➤ ... as is a solution.
This symbol identifies important information or measures regarding the protection of the envi‐
ronment.
Further subjects are introduced here.
Service Manual Screw Compressor
ASK T SIGMA CONTROL BASIC
3