Table of Contents
Advertisement
Simrad SD10 Sailboat Drive
3. INSTALLATION
3.1 Installation Planning
150mm
The selection of the steering cable entry/exit port does not have a preference. To
provide more flexibility for routing the steering cable, the entry/exit port
arrangement can be reversed. If ports are reversed, the steering direction will
also be reversed. The Simrad autopilot software will automatically compensate
for this.
REVERSIBLE CABLE
ENTRY-EXIT
TYPICAL VERTICAL
4
When planning an installation, it is recommended that you
follow 3 steps:
• Determine mounting site for the drive unit.
• Determine mounting site for the connection kit.
• Determine routing path for the steering cable.
Determine Mounting Site for Drive Unit
The mounting site should provide adequate
space to accommodate the drive envelope
including the entry and exit points for the
steering cable. The drive can be mounted at
any angle. See detailed graphics of drive
envelope (left) and mounting samples
225mm
below. Note that no access for maintenance
purposes is required.
150mm
MOUNT
REVERSIBLE CABLE
ENTRY-EXIT
TYPICAL HORIZONTAL
MOUNT
20222683 / A
Advertisement
Table of Contents
