Wiring Of Comat Boxx; Connection Of Power Supply - Comat BoxX Series Hardware User Manual

Chapter 2
Installation and wiring of Comat BoxX

2.2 Wiring of Comat BoxX

Use a screwdriver with a tip width of 3mm for wiring of Comat BoxX. The cross section of the wires
are determined according to the following ratings:
1 x 2.5 mm or 2 x 1.5 mm
2

2.2.1 Connection of power supply

1. AC Types:
AF-10MR-A: 110 – 230VAC; 50/60Hz;
AF-20MR-A: 110 – 230VAC; 50/60Hz
2. DC Types:
AF-10MR-D:
AF-10MT-GD:
AF-20MR-D:
AF-20MT-GD:
Note:
Min. tension for AF-10 = 10.0V
Min. tension for AF-20 = 10.5V
3. Connection of power supply according for AC types Fig. 2.5 and DC types Fig. 2.6
Fig. 2.5 AC power supply
12
Comat BoxX, Hardware User's Manual / 11.2004 E
2.
12 - 24VDC
12 - 24VDC
12 - 24VDC
12 - 24VDC
Current consumption:
26mA at 230VAC
50mA at 230VAC
Fig. 2.6 DC power supply