Chapter Ii; Installation And Wiring Of Comat Boxx; Installation; Installation Method - Comat BoxX Series Hardware User Manual

Chapter 2

Installation and wiring of Comat BoxX

Chapter II

Installation and wiring of Comat BoxX

2.1 Installation

2.1.1 Installation method

Due to the compact size the device it is suitable for fitting inside machines and installation is quite
simple:
1. Use a standard DIN rail for installation of Comat BoxX as shown in Fig. 2.1.
2. Use the screw holes on Comat BoxX for installation onto a flat surface.
The LCD board of Comat BoxX is removable. Gently lever open with a screwdriver and the LCD can
easily be unplugged.
Caution:
Do not remove the LCD board with power on, otherwise the device will be damaged or endanger
personal safety.
10
Comat BoxX, Hardware User's Manual / 11.2004 E
Fig. 2.1
Use standard DIN rail for installation
Fig. 2.2
Remove LCD board correctly