Unpacking To Installation; Confirming The Products - Mitsubishi CR751-D Instruction Manual

2Unpacking to installation

2 Unpacking to installation

2.1 Confirming the products

Confirm that the parts shown in the standard configuration of the controller shown in
with the purchased product.
Users who have purchased options should refer to the separate "Standard Specifications". The primary power
supply cable and grounding cable must be prepared by the customer.
Table 2-1 ： Standard configuration
No.
CR750-D controller
1 Controller
2 Safety manual
3 CD-ROM (Instruction manual)
4 Dummy plug for T/B
5 CNUSR connector (Connector cover)
6 CNUSR connector (Plug)
7 CNUSR connector
8 Ferrite core
9 Noise filter
10 Lock cover set
11 Fuse (reserves)
12 Fuse (reserves)
13 Guarantee Card
CR751-D controller
1 Controller
2 Safety manual
3 CD-ROM (Instruction manual)
4 ACIN connector
5 ACIN terminal
6 Dummy plug for T/B
7 CNUSR connector (Connector cover)
8 CNUSR connector (Plug)
9 Ferrite core
10 Noise filter
11 Fuse (reserves)
12 Fuse (reserves)
13 Cover plate
14 Cable fixing plate
15 Cable clamp
16 Guarantee Card
2-6 Confirming the products
Part name
CR750-D
BFP-A8006
5F-FA01-C00
2D-DP1
10350-52Y0-008
10150-3000 PE
BU770D007G51
E04SR301334
SUP-EL20-ER6
HL-05FA
LM16
HM32
CR751-D
BFP-A8006
5F-FA01-C00
1-179958-3
316041-2
2F-DP1
10350-52Y0-008
10150-3000 PE
E04SR301334
SUP-EL20-ER6
LM16
HM32
AB-10N
AB-6N
Type Qty.
1 unit Stand alone type
1 copy
1 pc. Stand alone type
1 pc. Connect, when not using T/B.
1 pc.
1 pc.
3 pc. For the CNUSR11/12/13 connector.
1 pc. For emergency stop wiring
1 pc. CE specification only.
1 pc. For locking the power switch.
2 pc. For the hand.
2 pc.
1 copy
1 unit Stand alone type
1 copy
1 pc. Stand alone type
1 pc.
2 pc.
1 pc. Connect, when not using T/B.
2 pc.
2 pc.
1 pc. For emergency stop wiring
1 pc. CE specification only.
2 pc. For the hand.
2 pc.
1 pc. For connector protection of the controller.
1 pc. For fixing the cable of the controller.
2 pc. For fixing the machine cable
One fixing screw (M4) is attached.
3 pc. For fixing cables of TB (power supply) and
FG(communication).
Three fixing screws (M4) are attached.
1 copy
Table 2-1 are enclosed
Remarks