Platinum Tools Net Prowler TNP700 Quick Start Manual page 10

How to Perform a Device Discovery Test
Ping IPV4/IPV6
• Connect the Net Prowler to a switch, router, or active network jack.
• From the home screen, use the right arrow button to select the Network
Discovery icon and press the enter button
Discovery soft key
• The Net Prowler will perform a DHCP test and obtain an IP address (to ping IPV6,
press the IPV6 soft key).
• Press the ping soft key
• Use the left and right arrows to highlight a digit. To change a digit, use the up
and down arrows or press the keypad soft key
keypad. To hide the keypad, press the keypad soft key again.
• Press the test button to ping the IP address.
List
• Press the list soft key
pinged IP addresses.
• To ping an IP address in the list, use the up and down buttons to naivgate to the
desired IP address and press the test button.
Favorites
• From the List screen, press the Favorites soft key
favorites list.
• Use the up and down arrow buttons to scroll through the list.
• Press the test button
show the URL IP address obtained by the DNS server.
• Press the test button
10
.
.
to view discovered IP addresses and manually
to select an IP or URL address. The Net Prowler will
again to ping the IP address.
or press the Network
to use an alphanumeric
to ping from the
Net Prowler Quick Start Guide