Tone Generator - Platinum Tools Net Prowler TNP700 Quick Start Manual

Tone Generator

• Power on the Net Prowler.
• Use the left or right arrow buttons to select the tone generator icon and
press the enter button.
• The Net Prowler will automatically activate the tone generator upon entering the
tone generator menu.
• Connect a cable to either the RJ45 jack or coax connector located on the top of
the Net Prowler.
• To switch between network and coax cables, press the coax cable/RJ45 soft key
/
• Press the up or down arrow buttons to select one of four cadences.
• Press the left or right arrow buttons to select which pin or pair to place the tone.
• Use a tone probe alongside the cable or at the end of the cable to produce an
audible tone.
6
.
Net Prowler Quick Start Guide