Step 3 In the General Settings interface, you can configure the following settings: NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
Step 4 If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain
an IP address and other network settings from that server.
Step 5 After having configured the general settings, click the Apply button to save the settings.
3.8 Wi-Fi Settings
Purpose:
The device can work as a wireless network router. Follow the steps to setup a network router.
Step 1 Go to Menu > Configuration > WiFi.
Step 2 Configure wireless network parameters, including SSID, Security Mode, Key, and Network
Bridging.
SSID: It is the short for Service Set Identifier. SSID is the WiFi name that the device provides.
Area/Country: Select where the router is used.
Channel: Select the best channel according to your situation.
Security Mode: Select the security protocol for wireless network.
Encryption Type: It is used to protect information. TKIP and AES are selectable.
Key: Enter the encryption key.
WPS: It is the short of Wi-Fi Protected Setup. Click the button and then you can connect the
wireless network without password for once.
Network Bridging: Enable device to create a single aggregate network from multiple
communication networks or network segments.
Wi-Fi Network Video Recorder Quick Start Guide
Figure 3-11 Wi-Fi Settings
18