Page 1
Sicherheitsbrenner eco Nr. 934 0100 / 935 0100 Ideas for dental technology Made in Germany...
Page 2
Safety Burner eco 934 0100 / 935 0100 1. Introduction Description Symbols used Danger Immediate danger. Observe the accompanying documentation! Warning By not following the instructions the burner could become damaged. Note Useful tips for operation or use. Mark of conformity DVGW (Deutscher Verein des Gas- und Wasserfaches e.V.).
Page 3
– other than the changes described in the instructions for use. the product is not repaired by a specialist or if third-party spare parts are installed, not original Renfert parts. the product has been damaged by mechanical impact or if the product has been dropped.
Page 4
3. Product Description Component groups and functioning elements 1 Mixing tube 2 Sensor 6 Actuation knob for ignition safeguard 8 Sensor holder Supplied in Delivery Fig. 1 4. Initial Operation stipulations or valid national regulations. on the burner. 5. Operation Caution / risk of burning! When igniting the burner, turn the mixing tube away from the user and other objects.
Page 5
6. Cleaning / Maintenance Cleaning Caution: Never clean the burner by boiling or steam cleaning! Never use acetone when cleaning! Do not blow compressed air into the hose connection or the mixing tube on the burner! This could damage the safety valve. Only the following parts may be cleaned with boiling water or steam cleaner once they have been dismantled: Mixing tube (Fig.
Page 6
If the burner nozzle is blocked, it can be dismantled from the mixing tube Fig. 3 Spare parts For the order numbers of consumables and spare parts please refer to the spare parts list at the end of www.renfert.com. Maintenance The burner is maintenance-free. 7. Troubleshooting Guide...
Page 7
10. Guarantee When the equipment is used as intended and stipulated, Renfert warrants all parts of the unit with a guarantee of 3 years. Parts which are susceptible to regular wear and tear, such as consumables, are excluded from this...
Need help?
Do you have a question about the Safety Burner eco and is the answer not in the manual?
Questions and answers