Last Number Redial List - Siemens Gigaset SL56 Owner's Manual

Using the directory and lists
You can store voice patterns for a total of
30 directory entries. Entries with voice
patterns are marked with ´.
You can also perform voice dialling func-
tions via an activated Bluetooth headset.
Recording voice patterns
Record your voice pattern in quiet sur-
roundings. Your mouth should be around
25 cm away from the handset. The voice
pattern can be 1.5 seconds long.
¢
s s (Select entry; page 11)
Open menu.
Options
Record Pattern
Select.
Press the display key to start
§OK§
the recording.
(On the Bluetooth headset:
instead of pressing the head-
set's talk key; it can take up to
5 seconds to establish a con-
nection to the handset)
You will hear a short beep. The display will
prompt you accordingly. Speak the name.
Repeat the name after being prompted to
do so by the display and by a further beep.
In the list, ´ is shown next to the name.
Note:
If the memory cannot accommodate a new
voice pattern, a message will appear on the
display. The handset will automatically return
to the directory. Delete a voice pattern and
select Record Pattern again.
To change a voice pattern, you must
record over it.
Using voice dialling
v
Press and hold.
Speak the name after the beep. If the
name matches the recorded voice pattern,
it is repeated. The number is dialled.
Playing voice patterns
¢
s s (Select entry with ´ )
Open menu.
Options
14
Play Pattern
Select and press
pattern will be played in
handsfree mode.
a
Press and hold (idle status).
Deleting voice patterns
¢
s s (Select entry with ´)
Open the menu.
Options
Delete Pattern
Select and press
a
Press and hold (idle status).
The directory entry is retained.

Last number redial list

The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again. The
number is dialled.
When a name is displayed, you can display
the corresponding phone number by
pressing the display key
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
Open menu.
§Options§
The following functions can be selected
with q:
Automatic Redial
The selected number is automatically
dialled in fixed intervals (at least every
20 seconds). The handsfree key flashes
and "open listening" is activated.
. The voice
§OK§
.
§OK§
.
§View§