Cobra microTALK FRS 307-2 VP Operating Instructions Manual page 7

O P E R AT I O N
3. The radio will continue to scan all memory
locations and stop if an incoming
transmission is detected. The unit will
remain on that location for 10 seconds.
During that time you can:
a) Press and hold the TALK button and talk.
The radio will remain on that memory
location channel and return to Standby mode.
TALK button
b) Push the
CHANNEL SELECT
b u t t o n
CHANNEL SELECT
button up or down
to resume scanning
memory locations.
c) Press the MODE button to proceed to
other functions.
If you do not press any button within
10 seconds, the radio will automatically
resume scanning memory locations.
Setting Dual Watch
Dual watch allows you to simultaneously
monitor any two channels/privacy codes
you select. To program Dual Watch:
1. Select the first channel and privacy code
you wish to monitor. (To review, see
pages 3-4.)
11
ENGLISH
2. Press the MODE button until the Dual
Watch icon flashes.
MODE button
3. Push the CHANNEL
CHANNEL SELECT
SELECT button up or b u t t o n
down to select the
second channel you
wish to monitor.
4. Press the MODE button. The privacy code
flashes.
MODE button
5. Push the CHANNEL SELECT button up or
down to select the second privacy code.
6. Press and release the
LOCK
LOCK button to store
b u t t o n
the second channel/
privacy code and
engage Dual Watch.
7. To terminate Dual Watch and return to
normal Standby mode, press and release
the LOCK, TALK or MODEbutton.
ENGLISH
Turning Roger Beep
Off and On
With Roger Beep turned on, your listener
will hear an audible tone when you release the
TALK button. To change Roger Beep mode:
1. Press the MODE button until the Roger
Beep icon flashes and the current setting
("on" or "off " ) is displayed.
MODE button
2. Push the CHANNEL SELECT button up or
down to turn Roger Beep on or off.
CHANNEL DOWN CHANNEL UP
3. To enter the new setting you can press and
release the LOCKbutton, or press no
buttons for 15 seconds. Press the MODE
button to enter the new setting and
proceed to other functions.
MODE
LOCK button
b u t t o n
O P E R AT I O N
Turning Keystroke Tones
Off and On
With Keystroke Tones turned on, your unit will
sound beeps each time you press a button or
change a setting. To change Keystroke Tones
mode:
1 . P ress the MODE button until the Keystro k e
tones icon flashes and the current setting
("on" or "off") is displayed.
MODE button
2. Push the CHANNEL SELECT button up or
down to turn Keystroke Tones on or off.
CHANNEL DOWN CHANNEL UP
3. To enter the new setting you can press and
release the LOCKbutton, or press no
buttons for 15 seconds. Press the MODE
button to enter the new setting and
proceed to other functions.
12