Desert Aire CM3500 Series Installation And Operation Manual page 23

Pressure and Temperature, Discharge Pressure and Temperature,
Intake Air Relative Humidity, Intake Air Temperature, Supply Air
Temperature, Off Evaporator Temperature, Liquid Pressure and
Temperature Water Inlet Temperature, Water Outlet Temperature,
Water Between Temperature and Supply Fan Differential Pressure.
Wheeled units can also include sensing of the Outside Air Temperature
and Relative Humidity, Return Air Temperature and Relative Humidity,
Optional Exhaust Air Relative Humidity, and Optional CO Sensing
2
and Air Differential Pressure sensors.
Pressing the UP or DOWN keys from the first Analog Input Screen will
cycle through all applicable screens. Refer to your wiring schematic
for the exact sensor wiring details of your dehumidifier.
To return to the I/O STATUS screen, press the Esc key.
Figure 12
Pressing the UP or DOWN keys will display the second Analog Inputs
Screen (Figure 13), if applicable. If your unit comes standard with dual
refrigerant circuits, the Suction Pressure and Discharge Pressure of
circuit B are displayed here. If your unit has an Enthalpy Wheel with
Freeze Protection Exhaust Air Relative Humidity will be shown here. If
your unit is set for CO control, the Reheat Condenser Differential Air
2
Pressure will be shown here.
To return to the I/O STATUS screen, press the Esc key.
23
Desert Aire - CM3500 Manual