3. Connect the RAU cable to the
junction box as shown in Figure 21
and Table 11.
Wiring from RAU to junction box
Table 11.
Wire
Black
Red
Blue
White
4. Secure all outdoor cables to stationary objects using cable ties
(not included) to ensure that the cables are secured to the
building and cannot be damaged by wind, animals, or vandals.
5. Close the cover to protect the contents from weather and vandals.
Ring (blue)
white)
RAU cable
Figure 21. RAU cable
Signal
+12 V return
+12 V source
Ring
Tip
(red)
+
12 V
(black)
372AB_1999Q
Install the junction box
27