Table of Contents
Advertisement
Make sure you have all supplies and equipment
Check to see which QUALCOMM kit you are installing. Depending
on the kit purchased, you may need additional items to complete the
installation.
Grounding Accessories
Grounding accessories available from electrical supply companies
are not included in the kit; however, they are required to ground the
RAU and junction box. Quantities required in a typical installation
are shown in Table 4. In addition, the installer should supply the
pole needed to support the RAU.
Note
If fabricating your own 15-meter (50-foot) cable for connecting
the RAU to the junction box, the cable must conform to
specifications given in Appendix B. Specifications for Cables.
Specifications for fabricating cables must be followed to avoid
damage or poor performance of the equipment and to avoid
invalidating your warranty.
Table 4. Grounding Supplies
Type
#6 AWG copper primary ground cable
#6 AWG (pink) ground lug
#6 AWG solid copper ground wire used to
ground junction box
Copper C-type compression tap (#6 to #6
wire)
2.7 to 3 meter (8 to 10 foot) ground rod
Quantity needed
Amount needed depends
on site
1 each
0.5 meter (1.6 feet)
1 each
1 – length depends on soil
type
Table 4. Grounding Supplies
Copper clamp, #6 AWG wire to ground
rod, screw type
Bolts to secure grounding wiring to rod
Wall mounting brackets and fittings
RAU to junction box cable (provided by
QUALCOMM or the equivalent cable)
Appendix B. Specifications for
See
Cables
.
Pole for mounting
Cable ties
Table 5 lists the wires and jacks recommended for use in installing
the interior wiring.
Table 5. Interior wiring
Recommended item
Standard telco cable
6-position modular jack, wall mount
(EIA-568 or EIA-520) RJ-11
Wiring boxes
Inventory
1 each
As needed
If needed
As needed. Not to exceed
15 m (50 feet).
If needed
As needed
Quantity needed
As needed to a maximum
of 182 meters (597 feet)
As needed
1 each
10
Advertisement
Table of Contents
