Cleaning - Oven - Siemens HG2425UC Use And Care Manual

Table 8: Cooktop Cleaning Chart
Cooktop Part/Material
Grates / Porcelain Enamel on Cast
Iron
Igniters / Ceramics

Cleaning - Oven

Daily Cleaning
Cleaning Guidelines
Avoid these cleaners
Table 9: Oven Cleaning Chart
Part
Racks
Fiberglass Gasket
Glass
Painted Surfaces
Suggested Technique(s)
• Hot water and detergent. Rinse
and dry immediately
• Nonabrasive cleaners such as
Fantastic
Rinse and dry immediately.
• Mild abrasive cleaners such as
Bon Ami
• Carefully wipe with a cotton swab
dampened with water, ammonia
or a non-abrasive cleaner such as
Formula 409
• Gently scrape soil off with a tooth-
pick.
Daily cleaning of the inside of the oven is not necessary. When soil builds up, use
the self-clean function as explain in "Self Cleaning the Oven" on page 38. See
"Oven Cleaning Chart" on page 37 for instructions for specific surfaces and items.
• Do not use caustic cleaners such as Easy Off®. They may etch the surface.
Wash with hot sudsy water. Rinse thoroughly and dry, or gently rub with cleansing powder or
soap filled pads as directed. If racks are cleaned in the oven during the self-clean mode, they
will lose their shiny finish and may not glide smoothly. If this happens, wipe the rack edges with
a small amount of vegetable oil, then wipe off excess.
DO NOT HAND CLEAN GASKET.
Wash with soap and water or glass cleaner. Use Fantastik® or Formula 409® to remove grease
spatters and stubborn stains.
Clean with hot sudsy water or apply Fantastik® or Formula 409® to a clean sponge or paper
towel and wipe clean. Avoid using powdered cleansers, steel wool pads and oven cleaners.
® ®
or Formula 409 .
® ®
or Soft Scrub .
®
.
Recommendations
Cleaning and Maintenance
Important Reminders
• The grates are heavy; use care
when lifting. Place on a protected
surface.
• Blisters / crazing / chips are com-
mon due to the extreme tempera-
tures on grate fingers and rapid
temperatures changes.
• Acidic and sugar-laden spills
deteriorate the enamel. Remove
soil immediately
• Abrasive cleaners, used too vigor-
ously or too often, can eventually
mar the enamel.
• Keep the ignitor ports clean for
proper performance. It is neces-
sary to clean these when there is
a boilover or when the burner
does not light even though the
electronic ignitors click.
• A damp igniter will prevent burner
from igniting. For proper burner
performance, keep ignitors clean
and dry.
• Remove any lint that may remain
after cleaning.
English 37