Use Of Usb Peripheral Devices - Siemens Simatic PC Panel PC 870 Start-Up Instructions

Connecting and Switching On the Panel PC 670/870
2.8

Use of USB Peripheral Devices

USB interfaces
Panel PC 670
operating system
Windows 98 SE, German/English
Windows NT 4.0 with USB driver
extension, German/English
Windows 2000 Professional Multi-
Language
Windows XP Professional Multi-Language
Panel PC 870
operating system
Windows NT 4.0 with USB driver
extension, German/English
Windows 2000 Professional Multi-
Language
Notice
A short circuit of the voltage supply on the USB front connector causes a reset
on the Panel PC.
Caution
Wait 10 seconds after inserting or unplugging a USB unit before starting to use
USB units available (e.g. external keyboard or mouse).
This also applies to touch panels, particularly with regard to touch operation.
1
In order to install USB devices, it is necessary to use a PS/2 mouse and PS/2 keyboard.
2 Refer to Section "Panel PC 670/870 - Windows NT 4.0 with USB Stack" on Page 2-20.
2–18
With membrane With
keyboard touchscreen
yes yes
2
With restrictions With restrictions
yes yes
yes yes
With membrane With
keyboard touchscreen
2
With restrictions With restrictions
yes yes
SIMATIC Panel PC 670/870 Start-Up Instructions
Release 11/02
1
2
2