Siemens Simatic PC Panel PC 870 Start-Up Instructions page 30

Connecting and Switching On the Panel PC 670/870
License number
After connection to the mains, the Panel PC 670/870 performs a self-test.
During the self-test, the message Press <F2> to enter SETUP appears
briefly.
After the self-test has been completed, the operating system is loaded.
The "Welcome" page will be displayed. Follow the on-screen prompts.
1. Go to the next page.
2. Accept the license agreement and continue to the next page.
3. Enter the license number – if necessary – confirm it and switch to the next
window. The system settings are then updated and the desktop is set up.
2–8
SIMATIC Panel PC 670/870 Start-Up Instructions
Release 11/02
Step 14