Additional Drivers And Applications; Documentation & Drivers Cd; Touchware Settings - Siemens Simatic PC Panel PC 870 Start-Up Instructions

Release 11/02
3.3

Additional Drivers and Applications

3.3.1 Documentation & Drivers CD
The Documentation & Drivers CD supplies contains the specific driver and
Panel PC applications for the operating systems supported.
Note
These drivers and programs supplied have been system tested and approved
for this Panel PC.
All the other drivers and programs are excluded from the terms of warranty.

3.3.2 Touchware settings

Note
Please allow the Panel PC 670/870 to warm up for a few minutes prior to
calibration.
User-specific touchware settings can be defined via the settings Touch Settings
and Tools in the Touchware (refer to Figure 3–2).
Call in via:
MicroTouch TouchWare icon on the desktop or
Start
Modifying touch settings
Proceed as follows to change the touch settings:
1. Start the Touchware Settings as described above.
SIMATIC Panel PC 670/870 Start-Up Instructions
Settings Control Panel
Operating the Panel PC 670/870
MicroTouch Touchscreen
3–5