Amp Memory Reset (Factory Default); Specifications - REVV Generator 120 Owner's Manual

8.0

Amp Memory Reset (Factory Default)

If you would like to clear the amp's memory of all saved program patches
& restore all of the amps settings to the factory default, which includes
MIDI channel (restored to CH1), OMNI Mode, FX Loop (Restored to off at
power up) & a full memory clear, proceed with the procedure below:
With power OFF, press & hold CH3 toggle switch (up) & the CH4 aggres-
sion switch (down) together & turn the power switch to the ON position.
The amplifier will flash the CH3 & CH4 LEDs to confirm that the factory
defaults have been restored.

Specifications

9.0
—
—
—
—
—
—
—
—
—
—
—
—
4 Channels: Clean, Crunch, Purple Gain, & Red Gain
Independent output power control on each channel
Intelligent foot control capabilities
MIDI capabilities
— CC control of all functions
— OMNI functionality
3 band EQ per channel + voicing switches
REVV tube arrangement: 5 - 12AX7, 1 - 12AT7, 4 - 6L6GC
Presence & depth control
Two master volume controls
4, 8, 16 ohm output impedance speaker jacks
Baltic birch head shell
Dimensions: 26.5" × 10" × 10.5"
Weight: 45 lbs
Revv Owner's Manual - 41