Advertisement
TROUBLESHOOTING
Problem
Possible Cause
Winch line has
difficulty spooling
Bent drum side
off the winch
flange.
drum by hand.
Worn drum bearing
surfaces.
Free spool clutch is
damaged.
Winch is not
mounted correctly or
square on the winch
plate.
Internal damage
to ring gear.
Replace Drum.
Replace motor sub-assembly and/or
clutch sub-assembly.
Remove and inspect gear carrier assembly.
Inspect output gear, intermediate gear, input
gear, sun gear ring and gear ring output.
Remove burrs with file.
Check mounting hole measurements for
consistency and squareness. Be sure that
mounting surface is flat and mounting
bolts are tight.
Disassemble gear assembly, inspect for
damage, clean and grease or replace worn or
damaged parts.
The Trusted Source
15
Possible Solution
Advertisement
