WIKA TR31-3 Operating Instructions Manual page 26

8. Configuration software WIKAsoft-TT
The configuration interface can only be loaded when an
instrument is connected.
EN
8.2 Configuration procedure
Steps 1 and 2 are carried out automatically when starting the software.
1. "Loading the instrument data"
2. "Loading configuration"
3. [optional] Cancel write protection ("key" symbol at the bottom right)
4. Change the required parameters
→ Sensor/Measuring range/Error signalling etc.
5. "Save to the instrument"
6. [optional] Activate write protection
7. [optional] Print configuration protocol
8. [optional] Test: "Loading configuration" → checking the configuration
26 WIKA operating instructions models TR31-3, TR31-K