Lime and remnants of food in the washing
water can block the nozzles in the spray
and the arm
Inspect the nozzles in the spray arms
for blocked holes due to remnants of
If necessary, pull the lower arm
upwards and lift it off.
Unscrew the upper spray arm
Clean both spray arms under running
Refit the spray arms. Ensure that the
lower arm has locked into place and the
upper one is screwed tight.
Resolving minor problems
Experience has shown that you can
resolve most problems that arise during
normal daily usage yourself, without
having to call out a service engineer. Not
only does this save costs, but it also
means that the appliance is available for
use again that much sooner. The following
list of common occurrences and their
remedies should help you identify the
causes of most problems.
... when the appliance is
Appliance does not start up
Fault with fuse in mains electricity
Plug not inserted in wall socket.
Appliance door not closed
Programme button has not been
Water tap not turned on.
Blocked strainer in water intake
The strainer is situated in the
Aquastop or supply-hose