Download Print this page

Answering Calls; Making Calls; Transferring A Call - Siemens Gigaset 2400 Quick Reference Manual

Handset and charger

Advertisement

5.
When the base station and handset connect, the handset display will allow you
to select an intercom number associated with that handset. Valid selections are
1-8 or 1-4 (depending on base) and only unused numbers are displayed.
6.
Scroll to select an intercom number and press OK. The display will show
"Intercom X Registered."
Handset features may be accessed through dedicated hard keys (TALK, CONF,
END, MENU, INT) or two soft keys located directly under the display. The soft keys
are defined by the text or icon immediately above them. Pressing [#] and [$] soft
keys scrolls through the list of menu options. Pressing the soft key under
moves the menu to the previous level. The dashed line indicates the end of a menu
list.

Answering Calls

When the handset is in the charging cradle, lifting the handset out of the cradle will
answer the call
OR
When the handset is out of the charging cradle answer a call by pressing TALK on
the handset.

Making Calls

Making External Calls
1.
Lift the handset.
2.
Enter a number using the handset keypad.
3.
Press TALK to be connected to the phone line.
4.
To hang up or disconnect call, press END or return the handset to its holder.
Making Intercom Calls
1.
Press INT .
2.
Enter intercom number 1-4 or 1-8. (depending on model)
OR
3.
Press the ¬ key to call all handsets.
OR
4.
Press the 0 key to call base (2420 only).
OR
5.
Press the 9 key to access the answering machine menu (2420, 2415 only).

Transferring a Call

Transferring an External Call
1.
Press CONF.
2.
Press INT and select intercom number 0-8.
3.
Press END.
4.
If the transferred call is not answered, it returns to you after 30 seconds.
Transferring an Internal Call
1. Press CONF .
2. Press TALK and dial the number.
3. Press END.
Conference Calls
1.
Press CONF .
2.
Press INT and choose intercom number for internal conference.
OR
3.
Press TALK and dial external number.
4.
Press CONF again.
or MENU

Advertisement

loading