Table of Contents
Advertisement
Making measurements
If the newly added dispersant will be used in the future, add it to the Dispersants
Database by clicking Add to database.
Mastersizer 3000
Section/option
Description
level sensor
A value can be inputted that is suitable for the level sensor to
threshold
detect the dispersant level when filled. The value will be dif-
(Hydro MV only)
ferent depending upon the dispersant used.
The level sensor in the dispersion unit automatically stops
the tank being overfilled above a certain level. If the tank fails
to fill properly then the level sensor threshold, for the disper-
sant being used, may need adjusting. This value can be
changed either manually (for the current measurement only)
or by using the dispersants database, to store the new val-
ues for future use.
Configuring this threshold value will be done using the
accessory controls window; this is described in the Hydro
series wet dispersion units guide.
References and
Enter any further comments that help to describe the disper-
notes
sant.
Chapter 4
Page 4-31
Advertisement
Table of Contents
