Oki C542 Advanced Manual page 128

IBM PPR Setup
Item Factory
default
setting
Character Pitch 10 CPI
Font Condense 12CPI to 20CPI Specifies 12CPI pitches for Condense Mode.
Character Set SET-2
Symbol Set IBM-437
Letter O Style Disable
Zero Character Normal
Line Pitch 6 LPI
White Page Skip OFF
CR Function CR
LF Function LF
Line Length 80 Column
Form Length 11.7 inch or 11
inch
TOF Position 0.0 inch
Left Margin 0.0 inch
Fit To Letter Disable or
Enable
Text Height Same
EPSON FX Setup
Item Factory
default
setting
Character Pitch 10 CPI
Character Set SET-2
Symbol Set IBM-437
Letter O Style Disable
Zero Character Normal
Line Pitch 6 LPI
White Page Skip OFF
Description
Specifies character pitches in IBM PPR emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o and 9DH with
a zero.
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
Selects a carriage return from [CR] or [CR+LF].
Selects a line feed from [LF] or [LF+CR].
Specifies the number of characters per line.
Specifies the length of paper.
Specifies the distance from the top edge of paper.
Specifies the distance from the left edge of paper so that the
print starting point shifts to the right horizontally.
Sets the printing mode that can fit paper to the printable area
equivalent to 11 inches (66 lines).
Sets the height of a character.
SAME: The height stays the same regardless of CPI.
DIFF: The height varies according to CPI.
Description
Specifies character pitches.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o and 9DH with
a zero.
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
Item Factory
default
setting
CR Function CR
Line Length 80 Column
Form Length 11.7 inch or 11
inch
TOF Position 0.0 inch
Left Margin 0.0 inch
Fit To Letter Disable or
Enable
Text Height Same
Private Print Setup
Item Factory
default
setting
Verify job option Disable
Erase job option No overwrite
Keep job for 2 hours
Job Limitation Disable
Job Password Authentication OFF
Job Auto Search ON
- 128 -
5. Operating Management/ Specifications
Description
Select a carriage return from [CR] or [CR+LF].
Specifies the number of characters per line.
Specifies the length of paper.
Specifies the distance from the top edge of paper.
Specifies the distance from the left edge of paper so that the
print starting point shifts to the right horizontally.
Sets the printing mode that can fit paper to the printable area
equivalent to 11 inches (66 lines).
Sets the height of a character.
SAME: The height stays the same regardless of CPI.
DIFF: The height varies according to CPI.
Description
Set whether to verify a job before printing.
If enabled, the machine verifies that the job is not altered before
starting printing. The security is enhanced, however it will take
longer to start printing.
Set how to delete a job.
You can overwrite deleted data so that it will not be restored.
If enabled, it will take longer to delete.
Available value: No overwrite/Zero out once/Multiple random
overwrites
Set the storage period of jobs.
If the set period elapses after jobs are stored, the jobs will be
automatically deleted.
Available value:
15 minutes/ 30 minutes/ 1 hour/ 2 hours/ 4 hours/ 8 hours/
12 hours/ 1 day/ 2 days/ 3 days/ 4 days/ 5 days/ 6 days/ 7 days
Sets whether to save a restricted print job.
If [Private Print Only] is selected, print jobs other than private
print are not accepted.
Sets whether to verify a job password when the access control is
enabled.
Sets whether to search a job at the same time as unlocking the
panel lock when the access control is enabled.