Initializing The Network Settings - Oki C542 Advanced Manual

Initializing the Network Settings

• Initializing from Setting Menus of this Machine
• Initializing from the Operator Panel of this Machine (Boot Menu)
This procedure initializes all the network settings.
Initializing from Setting Menus of this Machine
You can restore the network settings to the factory default settings.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Network Menu].
5
Press [Network Setup].
6
Press [Factory Defaults].
7
Press [Yes].
Initializing from the Operator Panel of this Machine (Boot Menu)
If you cannot initialize from the configuration menu of this machine, you can initialize from the
operator panel.
1
Turn on the machine while pressing and holding "6" on the numeric keypad.
2
Enter the password.
The factory default password is "999999".
3
Press "#" on the numeric keypad.
The [Boot Menu] screen is displayed.
4
Press "1" on the numeric keypad.
5
Press "1" on the numeric keypad.
- 182 -
6. Network