Table of Contents
Advertisement
Available languages
Available languages
2 Specifications
Item
Wall mount weight (including the
3-axis adjustment unit, slide plate,
wall plate, wall plate cover, and
end cap)
Maximum load capacity
Vertical slide adjustment range
Horizontal slide adjustment range ±1.8 in. (45 mm)
Forward/backward slide
adjustment range
Horizontal roll adjustment range
Horizontal rotation adjustment
range
Vertical tilt adjustment range
Wall plate cover
When installing the wall plate cover, you need a space of approximately 10.3 inches (263 mm) from the center
of the wall plate to the left side, and approximately 9.9 inches (253 mm) to the right side.
Specification
Approx. 17.4 lb
—
(7.9 kg)
28.6 lb (13.0 kg)
—
±1.5 in. (38 mm)
—
—
0 to 12.6 in.
Adjustment from 3-axis adjustment unit installation
(0 to 320 mm)
position: 3.4 in. (87 mm)
±3°
Fine adjustments possible with adjustment dial
±8°
Fine adjustments possible with adjustment knob
±3°
Fine adjustments possible with adjustment dial
20.0 in. (505.7 mm)
8
Additional information
Reference
page
—
—
Refer to the
illustration
below
Refer to the
illustration on
page 9
Refer to the
illustration on
page 9
p. 36
s
p. 36
s
p. 37
s
Advertisement
Table of Contents
