Adjustment - KERN HFM 1T0.1 Operating Instructions Manual

7. Adjustment

 Switch-off balance and attach a carrying help if necessary.
 Switch-on balance with attached carrying help and during the selftest press the
ZERO and the
 Use the number keys to enter password:
or
select standard password „0000" with HOLD number, increase the flashing
number using
or
personal password, see function F8 ci
 Confirm with ZERO button, the first function „F0 di" is displayed.
 Press the
 Press the ZERO button, „UnLD" will be displayed.
 Unload the balance and wait until the LED
 Press the ZERO button, the currently set adjustment weight is displayed.
 In order to change, select the number to be changed using the HOLD button and
set the desired value using the
flashes.
 Confirm by the ZERO button, „Load" will be displayed.
 Attach the adjustment weight and wait until the LED
 Press the ZERO button.
 After successful adjustment the balance carries out a selftest, then it
automatically returns to weighing mode.
An adjusting error or incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure
HFM-BA-e-1813
button at the same time. „P1 - - - "is displayed.
button repeatedly until „F9 CAL" will be displayed.
button, the respective active digit
lights up.
lights up.
25