Behringer ULTRADRIVE PRO DCX2496 User Manual page 15

28 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual
6.11 5-way mono operation plus 1 additional mono signal
XENYX X2222USB Mixing console
Mono out 1
Stereo master
left channel
RS-232
In A In B
1 2 3 4 5 6 Outputs
EUROPOWER EP2000
Stereo power amplifier
High (6)
High mid (5)
Mid (4)
Low mid (3)
Low (2)
In B signal (1)
EUROLIVE B1800X PRO
Mono subwoofer
Fig. 6.11: 5-way mono operation plus 1 additional mono signal (per stereo side)
Again, two ULTRADRIVE PROs can be remotely controlled from a notebook/PC by using our free CrossOverRemote Software.
This set-up is similar to the one described in chapter 6.10. Here, however, even fi ve frequency-optimized ways per stereo side are transmitted. The subwoofer has a separate
mono-bridged power amp, just like the sixth channel, which can be used independently and is controlled from the separate B input. In our example, one of these mono
channels is used for an individual subwoofer, while the the mono channel of the second ULTRADRIVE PRO drives a full-range stage monitor.
Mono out 2
Stereo master
right channel
In A In B
LINK
(RS-485)
Outputs: 6 5
4-way
loudspeaker towers
(In A Signal)
High (6)
High mid (5)
Mid (4)
Low mid (3)
Low (2)
In B signal (1)
Left Right
EUROLIVE F1220A
Full range mono monitor
29 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual
6.12 5.1 Surround operation
Front
left
In A
RS-232
4 3 2 1
In A
Outputs: 1
Screen/curtain
Front left
High
(2)
Low
(1)
Front subbass (LFE) connected in a row
Rear left
Fig. 6.12: Surround 5.1
Surround processor/decoder
or
Front Rear
Front Rear
center right
right left
In B In C In A
Front left Front subbass
Front center Rear right
Front right Rear left
XENYX X2222USB Mixing console
In B In C In A In B
LINK
RS-485
2 3 4 5 6
Front center Front right
High High
(4) (6)
Low Low
(3) (5)
High (2)
High (4)
Rear right
Low (3)
Low (1)
Front
sub-
bass
In B In C
In C
Outputs: 6 not used 5 4 3 2 1
(To be continued on next page...)