So Charge Battery - Siemens SL56 User Manual

18
Charge battery
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a power
socket power socket and charge for
at least two hours.
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within the temperature
range 41 °F to 104 °F. At 41 °F above
or below, the charge icon blinks as a
warning. The mains voltage speci-
fied on the power supply unit must
not be exceeded.
Getting started
Charge icon not visible
If the battery is totally discharged, no
charge icon is displayed when the
charger is plugged in. It will appear
after two hours at most. In this case
the battery is fully charged after
3–4 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty-full):
A beep sounds when the battery is
nearly empty. The battery level is
only shown correctly during an
unbroken charging/discharging
cycle. You should therefore not
remove the battery unnecessarily and
where possible not finish the loading
process early.
a d g
Additional information
The charger heats up when used for long
periods. This is normal and not dangerous.
Outside your own home network .....p. 118
Performance....................................p. 119