Voice Command - Siemens SL56 User Manual

Additional information
If the memory is full or the camera is not
attached:
§Delete§ Delete picture currently
#
shown.
Toggle between reduced/full
*
screen.
Set display lighting.
[ Extras

Voice command

Functions can be started by a voice
command. A maximum 20 voice
recordings for voice dialing or voice
commands can be saved in the
phone (not on SIM card!).
Record
§Menu
A list with the functions available is
displayed.
G
§Record§
§Yes§
§Start§
A short signal sounds. Now say the
command corresponding to the
function and repeat it when
prompted.
Apply
Hold down the plus/minus side key at
the bottom (in standby mode).
A short signal (beep) sounds and a
prompt appears in the display. Now
say the function.
Noisy environments may affect voice rec-
ognition.
K [ K
Voice command
Select a function.
Press.
Confirm selected
function.
Start recording.
107