Table of Contents
Advertisement
16
SLC 500™ Analog I/O Modules
Cable Preparation END 1
Insulation
Cable Preparation END 2
Insulation
Labeling and Installing the Terminal Block
The terminal block has a write-on label. Labeling the terminal block will help
ensure that it is installed on the correct module.
When installing the analog module in a chassis, it is not necessary to remove the
terminal block from the module. However, if the terminal block is removed, use
the write–on label located on the side of the terminal block to identify the module
location and type.
Terminal Block
SLOT ____ RACK ____
MODULE _____
NOTE
Publication 1746-IN008A-US-P
The black dot on the terminal block label indicates the position
of terminal 0.
Foil Shield and
Drain Wire
Clear Wire
Clear Wire
Black Wire
Black Wire
Hide quick links:
Advertisement
Table of Contents
