Siemens Gigaset SL370 Owner's Manual page 38

Record a new announcement while play-
ing back announcement:
Press the display key.
§New§
u
If the answer machine's memory is full,
it will switch to
Announce Only
¤
Delete old messages and the answer
machine will automatically switch
back to
Ans. & Record
recording if required.
Deleting announcements/announce
only
¢ ¢
w Ð
Voice Mail
¢
Announcements
¢
Del Announce/Del Anc Only
Press the display key to con-
§Yes§
firm the prompt.
a
Press and hold (idle status).
Once you have deleted your announce-
ment, the relevant pre-recorded
announcement will be used again.
Selecting announcement mode
You can choose between
Announce Only.
¢ ¢
w Ð
Voice Mail
¢ ¢
Announcements
¢
/
Ans. & Record Announce Only
a
Press and hold (idle status).
The selected mode is saved even after the
answer machine is deactivated.
If the memory for messages is full in
mode, the answer machine will
& Record
switch to the Announce Only
will receive an instruction to delete old
messages.
¤
Delete old messages.
The answer machine automatically
switches back to the set mode once dele-
tion is complete. You can then reselect the
required recording mode.
mode.
mode. Repeat
Ans. & Record and
Set Ans. Mode
‰
( = on)
Ans.
mode and you
Answer machine operation (Gigaset SL375 only)
Setting "answer and record" or "announce
only" by toggling
You can use the
Ans Mode Time
change over the announcement mode for
a specific period.
Example: Ans. & Record
activate
Ans Mode Time
(e.g. 18.00 to 08.00) the answer machine
switches to
Announce Only
period. Outside this period (08.01 to
17.59), Ans. & Record
¢ ¢
w Ð
Voice Mail
¢ ¢
Set Ans. Mode
‰
( = on)
¤
Change multiple line input:
From:
Enter hours/minutes for the start of the
period in 4-digit format.
Until:
Enter hours/minutes for the end of the
period in 4-digit format.
Activation:
Select or Off.
On
¤
Save changes with
If the memory for messages is full and
has been selected, saving is
Activation: On
interrupted and you will receive an
instruction to delete old messages.
¤
Delete old messages and repeat the
setting.
As soon as you change the announcement
mode (page 37), the
tion is automatically deactivated.
Playing back messages
The date and time of each message is
logged (provided this has been set,
page 9) and displayed during the play-
back. If Calling Line Identification is acti-
vated, the caller's number or name is dis-
played. If the caller's number is stored in
the directory, their name is displayed.
setting to
mode is set. If you
and set a period
mode for this
mode is active.
¢
Announcements
Ans Mode Time
.
§Save§
Ans Mode Time func-
37