Siemens Gigaset SL370 Owner's Manual page 57

Handset settings
Please note:
– If Bluetooth is activated and accessories
(e.g. data cables page 66) are plugged into
the connection socket (page 1), Bluetooth
is automatically deactivated.
– If a Bluetooth voice connection has
already been established, Bluetooth is
not deactivated until it is ended.
– If a Bluetooth data connection has
already been established, the response
depends on the receiving device.
– Bluetooth is automatically reactivated
when the accessories are removed.
– If Bluetooth is deactivated and accessories
are plugged in, then Bluetooth cannot be
activated.
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note:
– If you register a headset, any headset that is
already registered will be overwritten.
– If you would like to use a headset with your
handset that is already registered to
another device (e.g. to a mobile phone),
please deactivate this connection before
you start the registration process to
Gigaset.
¢ ¢
w í
Data Transfer
¢
Search Headset / Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options
Trust Device Select and press
~
Enter the PIN for the Bluetooth
device you want to register
and press
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
56
¢
Bluetooth
.
§OK§
.
§OK§
Press the display key.
Cancel
Repeat search if necessary:
Select and press
§Options
Repeat Search
Select and press
Editing the list of known (trusted)
devices
Open list
¢ ¢
w í
Data Transfer
¢
Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
Viewing entries
¢
s (select entry)
Open list
Press the display key.
§Options
Select and press
View Entry
Device name and address are
displayed.
Back with
De-registering a Bluetooth device
¢
s (select entry)
Open list
Press the display key.
§Options
Select and press
Delete Entry
a
Back: press and hold key.
Please note:
If you de-register an activated Bluetooth
device, it may try to reconnect as an "unregis-
tered device".
Changing the name of a Bluetooth device
¢
s (select entry)
Open list
Press the display key.
§Options
Select and press
Rename
~
Change name
Press the display key
Save
a
Back: Press and hold key.
.
§OK§
.
§OK§
¢
Bluetooth
.
§OK§
.
§OK§
.
§OK§
.
§OK§