Allen-Bradley MicroLogix 1200 Installation Instructions Manual page 8

8 MicroLogix™ 1200 Isolated Relay Output Module
Output Wiring
(1)
Basic wiring of the 1762-OX6I is shown below.
L1 OR +DC
L2 OR -DC
L2 OR -DC
L1 OR +DC
L2 OR -DC
L1 OR +DC
L2 OR -DC
Labeling the Terminals
A write-on label is provided with the module. Mark the identification of each
terminal with permanent ink, and slide the label back into the door.
(1) Surge Suppression – Connecting surge suppressors across your external inductive load will extend the life of the relay
contacts. For additional details, refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Publication 1762-IN017B-EN-P - March 2004
OUT0 N.C.
L1-1
OUT1 N.O.
OUT2 N.C.
CR
OUT2 N.O.
L1-3
OUT3 N.C.
CR
L1-4
OUT4 N.O.
OUT5 N.C.
CR
L1-0
L1 OR +DC
OUT0 N.O.
CR
OUT1 N.C.
CR
L1-2 L1 OR +DC
OUT3 N.O.
OUT4 N.C.
CR
L1-5
L1 OR +DC
OUT5 N.O.
L2 OR -DC
L2 OR -DC