Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
• Press latch
lift up the cover
• Insert SIM card in the opening and
push gently until it engages.
(make sure the angled corner is in
the correct position, contacts
then slide out and
• Insert battery into the phone side-
ways , then press downwards
, until it engages.
• Insert cover as shown . Then
press downwards until it engages
Only 3 V SIM cards are supported. Older
SIM cards (5-volt technology) cannot be
used. Please contact your service provider
if you have an older card.
Your phone's display and the display cover
of the upper case are delivered with a pro-
tective film. Remove this film before getting
started. In rare cases the static charge cre-
ated by removing this film may cause dis-
coloration at the edges of the display. How-
ever, this will disappear within 10 minutes.