Reject Call; When Number Is Busy; Redial Previous Numbers - Siemens CL50 User Manual

Siemens cell phone user guide
Table of Contents

Advertisement

12

Reject call

Press or
§Reject§
S
press briefly.
Diverts the caller e.g. to the
§Transfer§
mailbox if
and "call waiting" (p. 13) has
been activated.

When number is busy

If the number called is busy or it can-
not be reached because of network
problems, the following options are
available (depending on the service
provider):
Auto redial ?
§Yes§
Press. The number is
automatically dialled for
up to 15 minutes at
increasing intervals.
During this period, no
other number can be
dialled. To end:
S
§No§
Press.
If no key is pressed the call is automatically
ended after a few seconds.
Making a phone call
Busy
is set (p. 44)
End key.

Redial previous numbers

To redial the phone number last
called:
A
Press the Call key
twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
B
Pick out the required
phone number from the
list, then press ...
A
... to dial.
§Options§
Call lists (p. 42).
Store phone number in the
Addressbook (p. 16)/Phone-
book (p. 20).
The numbers of calls that have been re-
ceived, dialled or missed are stored for call-
back purposes (p. 42).
An incoming call will interrupt any other use
of the phone.
Functions during the call (p. 13).
Switch off ringer for the current call (but not
if „Any key ", p. 63, is active):
*
Hold down.
The call is displayed. The caller hears the
dialling tone.

Advertisement

Table of Contents
loading

Table of Contents