Making A Phone Call; Redial Previous Numbers; End Call; Set Volume - Siemens C62 User Manual

14
Dialling with number
keys
The phone must be switched on
(standby mode).
Dial number (always with
J
area code, if necessary
with international dialling
code).
§Clear§
the last digit, a long press
clears the entire number.
Press the Call key to dial
A
the number.

End call

B
Press the End key briefly.
The call is ended. Press this key, even
if the other person hung up first.

Set volume

E
Press briefly during a call.
G
Set volume level and con-
firm with §OK§.
If the Car Kit is used, its volume set-
ting will not affect the usual setting
on the phone.

Making a phone call

A short press clears

Redial previous numbers

For redialling previously dialled
numbers:
A
Press the Call key once.
G
Pick out the required
phone number from the
list, then press ...
A
... to dial.
If number is busy
Automatic redial of last number
The phone number is au-
§Auto dial§
tomatically dialled for up
to 15 minutes at increas-
ing time intervals.
Reminder
A beep reminds you to re-
§Prompt§
dial the displayed phone
number after 15 minutes.
International dialling code
In standby mode, to insert international
dialling codes from the list:
0
Hold down until a "+" is dis-
played. This replaces the first
two digits of the international
dialling code.
Press, select country.
§+List§