Siemens BACNET 125-5037 Owner's Manual page 3

Building technologies bacnet vav actuator
Hide thumbs


Table of Contents
Rev. AA, February 2008
The information contained within this document is subject to change without notice and should not be construed as a
commitment by Siemens Building Technologies, Inc. Siemens Building Technologies, Inc. assumes no responsibility
for any errors that may appear in this document.
All software described in this document is furnished under a license and may be used or copied only in accordance
with the terms of such license.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance
with the instructions manual, may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against such interference when operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference in which case users at their own expense will be
required to take whatever measures may be required to correct the interference.
Control devices are combined to make a system. Each control device is mechanical in nature and all mechanical
components must be regularly serviced to optimize their operation. All Siemens Building Technologies branch offices
and authorized distributors offer Technical Support Programs that will ensure your continuous, trouble-free system
For further information, contact your nearest Siemens Building Technologies, Inc. representative.
Copyright 2008 by Siemens Building Technologies, Inc.
Your feedback is important to us. If you have comments about this document, please send them to
Product or company names mentioned herein may be the trademarks of their respective owners.
Country of Origin: US


Table of Contents

Table of Contents