Vertiv Cellcorder CRT-400 User Manual page 62

NOTE:
The user cannot have identical battery names under the
same location name or identical string names under the
same battery name.
Number of Strings
Temperature
Scale
Install Date
Number of Cells
Number of Data
Sets
Most Recent Read
Date
Overall Voltage
and Average
Resistance
(internal
resistance)
4200-002
File Properties – Editing Battery Data In The ADF
Select the number of strings that are associated
with the battery.
Select Fahrenheit or Celsius to convert
temperatures throughout the program.
NOTE:
This selection does not change the
values of data in the file. This
selection does change the way in
which the values are presented only.
Edit the date the battery was installed.
This selection is normally set to the number of
cells in the battery, but may be used to limit the
number of cells shown on charts artificially.
Number of Cells affects most data displays,
graphs, reports, and calculations. Changes to this
setting, however, do not affect actual cell data. No
data is lost by reducing the number of cells; the
excess cell values simply become unavailable to
the program until the number is changed back to
its original value.
Changes each time a set of readings is imported to
the file.
Indicates when the last set of readings was taken.
These values are calculated on the most recent set
of readings.
44 Revision 6