Vertiv Cellcorder CRT-400 User Manual page 201

CLC-200
Figure 375. Cellcorder CLC–200 Data Capture
 In the Battery Number box, select which battery data to
download from the Cellcorder. If the Memory Mode is 7 x 256,
the selection is from one to seven. If 28 x 64, the selection is
from one to 28.
 Download the First nn Cells defaults to the Number of Cells on
the File|Properties|General tab. It is the maximum number of
cells from which data will be captured and usually matches the
number of cells in the battery.
 Set ... at Cell Number nn to the cell number the CLC should
start downloading data to, typically one. Thus, Cellcorder Cell 1
data is recorded in the file under Cell 1, and so on.
NOTE:
Change the starting cell number when more than one
Cellcorder records data from the same battery. For
example, on a 256–cell battery, one Cellcorder tests cells 1
to 128 and stores the data in Cellcorder locations 1 to 128.
The other Cellcorder tests cells 129 to 256 and stores in 1
to 128 as well. Capture the first Cellcorder with the starting
cell number set to one and capture the second into the
same file with the starting number set to 129.
 Set the Read Date for this Data Set. Type a date or click the
drop–down button and use the calendar.
 To start capturing data, click OK. A bar on the Interface box
indicates progress. When finished, status shows Download 100%
completed (
4200-002
Cells). Click OK.
nn
183 Revision 6