Specifications - Sony Remote Commander Operating Instructions Manual

When the CD player, tape deck, or MD deck is
connected to the receiver via S-LINK CONTROL A1
jacks, Auto Function does not work properly.
/ Reprogram the remote (see pages 15 and 16).
"5.1(/DVD)" cannot be selected from the function
list even though the receiver has the 5.1(/DVD)
INPUT jacks.
/ A communication error has occurred. Point the
remote towards the receiver and select
"5.1(/DVD)" from the function list again.

Specifications

General
Remote control system
Infrared control
Power requirements 3 V DC with three LR6 (size-AA)
alkaline batteries
125 × 43 × 33 mm (5 × 1
Dimensions
15
1 /
Mass (approx.) 130 g (4.5 oz) excluding batteries
Design and specifications are subject to change without
notice.
×
3
/
4
inches)
16
19