Downloading Data From The Receiver - Sony Remote Commander Operating Instructions Manual

Programming the Remote
5
Move the easy scroll key to select the make of the
component ("Kenwood," for example), then press
the key to enter the selection.
When programming the remote to control
Sony component
Select "Sony."
Programming is now completed.
To cancel programming
Move the easy scroll key to select "EXIT" from the IR SET
list, or "CANCEL" from the CATEGORY list or MAKER
list, then press the key to enter the selection.
z
You can change the function of the SYSTEM STANDBY switch
The SYSTEM STANDBY switch is factory set to turn off the
receiver and other Sony audio/video components (i.e., "ALL
OFF" setting) as described on page 5. To change the setting,
move the easy scroll key to select "STANDBY" from the IR SET
list in Step 3 on page 15, then select "ON/OFF" from the
STANDBY list. The switch is now set to turn on or off the
receiver only.
STANDBY?
ALL OFF
ON/OFF
z
You can freely assign any component to USER 1 and 2 items
in the IR SET list
1 Do Steps 1 and 2 in "Programming the Remote" on page 15.
2 Move the easy scroll key to select "USER 1" or "USER 2," then
press the key to enter the selection.
3 Continue from Step 4 in "Programming the Remote" on page
15 to select the category and make of the component.
16
Downloading Data From
the Receiver
The remote communicates with the receiver every time a
button is pressed on the remote and displays the current
operation status of the receiver on the display window.
The remote can also download index names of the
program sources, preset stations, CD memos
information indicating the presence or absence of a CD in
*
each slot of a CD changer from the receiver.
Appears only when you have selected a Sony CD changer (5 discs, 50
*
discs, or 200 discs) connected to the receiver using the S-LINK
CONTROL A1 cable.
Be sure to turn on the receiver and point the remote
towards the receiver when performing the following
procedure.
1
Press SET UP.
The set up list appears.
2
Move the easy scroll key to select "DOWNLOAD,"
then press the key to enter the selection.
The DOWNLOAD list appears.
<DOWNLOAD>
FUNCTION
TUNER INFO
3
To download index names
Move the easy scroll key to select "FUNCTION,"
then press the key to enter the selection.
To download preset stations
Move the easy scroll key to select "TUNER INFO,"
then press the key to enter the selection.
*
, and