Denon AVR-4810CI Service Manual page 17

SPECIAL MODE
Special mode setting button
※ Press the ON/OFF button to turn on while pressing both buttons A and B at the same time.
Mode
Version display
(µcom/DSP Error Display)
Displaying the protection history mode
Initialization mode
(Remove settings for Installer Setup.)
Initialization mode
(Includes settings for Installer Setup)
Mode for switching tuner frequency step
Mode for preventing remote control
acceptance
Panel lock mode
Panel lock mode
(Remove Master volume)
Cancellation of panel lock mode
Installer Setup mode
STANDARD
ON/OFF
Button A Button B
STATUS RETURN
STATUS MENU
DSP
STANDARD
SIMULATION
CURSOR
CURSOR UP
DOWN
DIRECT/
STANDARD
STEREO
STATUS ENTER
DSP
ZONE2
SIMULATION
DIRECT/
ZONE2
STEREO
PURE
ZONE2
DIRECT
CURSOR
MENU
LEFT
PURE DIRECT/
DIRECT STEREO
DSP
SIMULATION
ZONE2 MENU
AVR-4810CI/AVR-4810
Serial No. and firmware versions such as Main, Sub, DSP are
displayed in the FL manager. Errors are displayed when they
occur. (Refer to 16 page.)
Displaying the protection history
(Refer to 18 page.)
Backup data initialization is carried out.
(Remove settings for Installer Setup.)
Backup data initialization is carried out.
(Includes settings for Installer Setup)
---E2 model only---
Change tuner frequency step to FM:200kHz/AM:10kHzSTEP.
Operations using remote control are rejected.
(Mode cancellation: Turn off power and execute the same button
operations as when performing setup.)
Operations using main unit panel buttons or master volume are
rejected.
Operations using main unit panel buttons are rejected.
Panel lock mode is cancelled.
Access Remote Maintenance mode via the internet.Installer Setup
is displayed on GUI/Option Menu.
※
Refer to AVR_RemoteMaintenance_.pdf of SDI.
ENTER STATUS
CURSOR RETURN
17
contents
s