Use In Zone 2/22, Explosion-Protected Area; General Information; Scope Of Supply; Contact Addresses - Burkert 2100 series Operating Instructions Manual

Failure to observe this operating manual and its operating instructions
as well as unauthorized tampering with the device release us from
any liability and also invalidate the warranty covering the devices
and accessories!
3.1. use in zone 2/22,
explosion-protected area
For use in zone 2/22, explosion-protected area applies:
DAnger!
danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged devices
or persons, there is a danger of explosion in the EX area.
• Take appropriate measures to prevent electrostatic charges in the
EX area.
• Clean the device surface of the solenoid valve by gently wiping
it with a damp or antistatic cloth.
8
english
Type 2100

General information

4. general inFOrMaTiOn
4.1. scope of supply
Check immediately upon receipt of the delivery that the contents are
not damaged and that the type and scope agree with the delivery note
and packing list.
If there are any discrepancies, please contact us immediately.
4.2. contact addresses
germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. : 07940 - 10 91 111
Fax: 07940 - 10 91 448
E-mail: info@de.burkert.com
international
Contact addresses are found on the final pages of the printed oper-
ating manual.
You can also find information on the Internet under:
www.burkert.com Bürkert Company Locations