Charging Method And Cautions - Art-Tech Diamond 1000 Instruction Manual

5. Only use genuine Art-Tech replacement
parts to repair your model.
6. Do not attempt to catch the Diamond 1000 or
Diamond Pro 1100 while ying.
7. Beginners should have an experienced pilot to
help them learning to y. Not recommended for
children under the age of 14.

CHARGING METHOD AND CAUTIONS

Integrated Balance Charger for Lithium Battery SPA026R
Specifications:
Input voltage: DC 110V~240V
Output voltage: DC 7.4V & 11.1V
(for 2 or 3 cell Li-Po battery)
Charging current: 0.6A~0.7A
Using Your Charger
1. Insert the charger's plug to the power outlet, the red and green lights flash, then the green
light remains on, the red goes out, which shows the charger works, you can now charge the
battery.
2. Insert the battery's balance plug into the correct charging port as shown, the red light
comes on which shows battery is charging.
3. Charge the battery for about one and a half hours, when red light goes out, the battery is
charged.
-14 +14