Test Running - Rheem SMUL 12 Installation Instruction

Detaching the mounting bracket (Hanger Arm) from the unit.
1. Detached the side panel from both side of the unit.
2. Loosen the mounting bolts and remove the hanger arm
3. Prepare to install the hanger arm on the ceiling or wall. Refer to the drawing below and the dimension
of the unit.
4. Drill a hole in the ceiling or wall for the anchor bolts.
5. Insert the anchor bolts into the drilled hole and drive the pin completely with a hammer. (See drawing
below)
P. 02

TEST RUNNING

RUN TEST:
* Check electrical main wire " voltage".
* Run the air conditioner for 15 minutes or more. Check the electrical current with ammeter
and compare with the specification.
P. 11
wire
Ammeter