OpenVox AE810P User Manual page 14

Port
PCI slot
Caution: During the above processes, an ESD wrist strap
is needed. Once power is on, you must not attempt to
install or take down the board. Do not forget to connect
PSTN lines into analog phones directly to make sure the lines are
available before inserting the PSTN lines into FXO ports. After hard ware
setup, it is time to install software.
OpenVox Communication Co. LTD.
A810P/AE810P on DAHDI User Manual
Power supply connector
EC module
Figure 4 Hardware setup
13
URL: www.openvox.cn